Amprobe AT-5000 Underground-Wire-Tracer User Manual

Page 28

T-5000 Bluetooth operation mode

R-5000 Bluetooth operation mode

options
Selecting Factory Preset resets certain internal Bluetooth settings to factory defaults.
Make sure the R-5000 receiver Bluetooth Setting is in the OFF position before entering any telecommunications central office or
other telecommunications data transmission infrastructure.

R-5000 options mode

Paired devices
The paired devices menu allows the user to mate up to six transmitters to a single receiver. If a receiver is within 30 ft. (9 m) of
a transmitter and Bluetooth transmission is ON for both instruments, the receiver logs the output power conditions and active
frequencies every 30 sec. Logged data is stored in the receiver memory until the receiver is synchronized with a PC or a web
server. The blue LED emits during active transmission.
Use the 4-way navigation button to move up and down the Bluetooth Settings list. Use the 4-way navigation button to move
right and highlight the options. Press the