Amprobe AT-5000 Underground-Wire-Tracer - Manual (Page 20)

18
High Frequency: 82kHz
‘
Power: 50Hz, 60Hz
‘
RF: ALL RF frequencies
‘
Push the 4-way navigation button (up/Down/Left/Right) to highlight the frequency menu. •
Push the Select button to open the frequency menu •
Push the 4-way navigation button (up or down) to select Low, Mid, High, Power, RF frequency range. •
Push the 4-way navigation button(Left or right) to move to the frequency values •
Push the 4-way navigation button(up or down) to toggle through the values •
Push the Select button to activate or deactivate a value •
Push Use button to confirm your choices •
Push Back button to return to the previous menu interface or cancel the changes •
NB. Deactivating frequencies does not permanently remove them from the R-5000 receiver. Access the frequency menu to
reactivate them.
Activated frequencies can be selected from the operational interface by Pushing the soft key. Selecting fewer
frequencies allows faster toggling between frequencies from the operational interface.