Amprobe AT-7000 - Manual (Page 9)

5
This manual contains information and warnings that must be followed for operating the
tester safely and maintaining the tester in a safe operating condition. If the tester is used in
a manner not specified by the manufacturer, the protection provided by the tester may be
impaired. This tester meets water and dust protection IP40 per IEC60529 Ed 2.1 (2001). Do
not use in rainfall! The tester is double insulated for protection per EN61010-1:2010 3rd Ed
to CAT IV 600V.
CAUTION: Do not connect the Transmitter to a separate ground in Electrically Susceptible
Patient areas of a health care facility. Make the ground connection first and disconnect it
last.
2. Kit comPonents
Your shipping box should include:
AT-7020 KIT AT-7030 KIT
AT-7000-R RECEIVER 1 1
AT-7000-T TRANSMITTER 1 1
TL-7000 TEST LEAD AND ACCESSORY KIT 1 1
CC-7000 HARD CARRYING CASE 1 1
USER MANUAL 1 1
BR-7000-T LI-ION RECHARGEABLE BATTERY - 1
BR-7000-R WITH 4AA RECHARGEABLE
BATTERIES
- 1
SC-7000 SIGNAL CLAMP - 1
HS-1 MAGNETIC HANGER - 1
1.5 V AA (IEC R6) BATTERY 10 -
1. Precautions and safety measures