Amprobe AT-7000 - Manual (Page 11)

7
ENERGIZED:
DE-ENERGIZED:
--
Main applications
Setting menu
Help guide
Buzzer volume adjustment Sensitivity adjustment
Figure 1a: Overview of all elements on home screen
Home menu
Figure 1b: Overview of all elements on the setting menu
Language English, French, German, Spanish, Italian
Backlight 25%, 50%, 75%, 100%
Setting
DEFAULT : Restore default settings
Help Guidance
ON : Device will guide you through each mode
OFF : Device will start without guidance
Sensitivity*
MAN : Manual sensitivity adjustment (+) and (-) keys
AUTO : Auto sensitivity adjustment
Smart Sensor Range
SHORT : For wire detection up to 3 feet
LONG : For wire detection between 3 and 20 feet
Breaker Voltage
110V : For 110V to 120V systems
220V : For 220V to 240V systems
*Note: The Auto and Manual sensitivity mode can be easily changed by pressing the + and
– key at the same time when the receiver is in a tracing mode. When sensitivity mode is set
to “Auto” manual adjustment is disabled.
2. Kit comPonents