Ericsson LBI-38823C - Manual (Page 38)

HOME/EMERGENCY KEY DEFINITION
The Home/Emergency key can be programmed in one of the following
configurations:
1. Emergency Enabled and Home Enabled - the radio will switch to the
programmed home System and/or Group, and send an emergency
transmission.
2. Emergency Enabled and Home Disabled - the radio will send an
emergency transmission on the current System/Group.
3. Emergency Disabled and Home Enabled - the radio will switch to the
home System and/or Group.
4. Emergency Disabled and Home Disabled - the key is not active.
EMERGENCY OPERATION (Optional)
Receiving An Emergency Call
If the radio receives an Emergency Channel Assignment, an alert tone
will sound and the 10’s digit in the System field will alternate between
displaying the digit and an "E".
Sending An Emergency Call
To enable an Emergency transmission:
1. Press and hold the Emergency key for the programmed duration. If
programmed, an "E" will replace the 10’s digit in the System field and
a alert tone will sound.
The radio may be programmed for both Quiet and/or Blind mode
in which case no alert tone is heard and/or the display does not
change respectively. If programmed to display an "E", the radio’s
display will return to normal operation once the PTT is pressed.
NOTE
38