Ericsson LBI-38823C - Manual (Page 11)

LOCK The LOCK key in combination with the SHIFT/CLR
key is used to lock the key pad. All buttons and keys
will be locked except the VOLUME, PTT, HOME/E,
SHIFT/CLR and the LOCK (shifted 0). This key is
available on System Model radios only.
RCL The RCL (Recall) key (shifted #) can be used to
recall manually entered individual and interconnect
calls in the EDACS and GE-MARC systems. This
key is available on System Model radios and is
active with trunked systems only.
INDICATORS
The 4-digit LIQUID CRYSTAL DISPLAY (LCD) uses the two
digits on the left side to indicate the System number and the
two digits on the right side to indicate the Group/Channel
number. In addition there are 9 status indicators that are
described on the following pages.
The LCD backlighting can be programmed to turn on anytime
a button or key is pressed. It will remain on for a programmable
length of time after the button or key is released. Backlighting
is programmed on a per Group/Channel basis or it may be
programmed to remain off at all times. Each radio that is
programmed with backlighting may also be programmed to
remain on or off when the PTT bar is pressed.
Figure 5 - Dual Format PCS

Display
11