Ericsson LBI-38823C - Manual (Page 34)

5. Press the STO key (shifted *) to complete the storage procedure.
6. Double click the SHIFT/CLR button to exit the Special Call mode and
return to the normal System/Group display.
Recalling Manually Stored Individual And Interconnect
Numbers
1. Press the # key to recall the individual call list or the * key to specify
the interconnect call list. The screen will blank and a tone will sound.
2. Enter the desired storage location number (0-9).
3. Press the RCL (shifted #) key and the radio will switch to the Special
Call mode. If the number is from the individual call list the ID number
will be displayed. If the number is from the interconnect call list, the
last four digits of the telephone number will be displayed.
If the memory location is blank the radio will sound a low pitch tone
after the RCL is pressed.
4. Individual - Once the desired individual call number is displayed in the
GRP (Group) field, press and hold the PTT to initiate the call. The radio
performs the necessary signalling required to obtain a working chan-
nel.
Interconnect - Once the desired interconnect special call number is
displayed in the GRP (Group) field, press and release the PTT to initiate
the call. The radio performs the necessary signalling required to obtain
a working channel.
5. Individual - When the signalling is successfully completed the "TX" and
"BSY" flags turn on and the Call Originate tone sounds. Speak directly
into the microphone. Release the PTT bar as soon as you stop talking
and wait for a reply.
34