Magnetic Products Permanent Magnetic Parts Lifter User Manual
Permanent magnetic parts lifter
Magnetic Products, Inc.
683 Town Center Drive,
Highland, MI 48357
Tel: 248-887-5600
Email: [email protected] • Website:
Permanent Magnetic Parts Lifter
Application:
MPI’s exclusive patent-pending Permanent Magnetic Parts Lifter (PMPL Series) is designed for ferrous parts and the direct replacement of vacuum cups located on
ferrous parts transfer systems.
Operation:
Powerful rare-earth magnet is activated by air pressure. An air solenoid (provided by the customer) controls both the on and off operation by connecting flexible air
lines to the quick disconnect fittings. All that is required to operate the unit are short bursts of air ranging from 40 - 60 p.s.i.
Standard Features:
•
MPI’s exclusive patent-pending “fail safe” feature is built into each magnet. Once the powerful permanent magnet is engaged, only air pressure applied in the reverse
“off” direction will disengage the unit, even if the air line is disconnected or losses pressure. This process ensures a positive connection between parts and the working
surface of the permanent magnetic parts lifter.
•
CNC machined from T-6061 billet aluminum
•
MPI’s exclusive replaceable and easy-to-change O-ring non-marring face
•
Standard sizes available: 1-3/4” to 9” diameter
•
Low air consumption and quiet operation
•
Air supply controls positive part pick up and release with no internal spring unlike other brands
•
Longer lasting solution compared to vacuum cups
•
Standard 3/8-NTP thread for retrofit to existing endofectors
Optional Features:
•
Steel air line fittings
•
Non-standard unit sizing
4/22/2014 | Page 1 of 2