Magnetic Products Metal Detector for Gravity-Fed Products - Manual (Page 2)

GF-MD September 2013 © Magnetic Products, Inc.
Features and benefits
Automatic balance and calibration of electronics
ensures many years of reliable performance. After
initial set-up, no further adjustment of electronics
is needed.
No maintenance electronics
Intuitive operation
The display panel shows only the information needed
to operate the detector. Easy-to-use software and
a simple teaching menu allows set-up and use by
nontechnical personnel. Over 120 products can be
stored and recalled. Password protection ensures
that only authorized users operate equipment.
Outstanding sensitivity and stability
New “recipes” or changes to current data are easily
programmed. Digital noise filters eliminate any
undesired signals, while multichannel technology
provides optimum detection of ferrous, nonferrous or
stainless steel contaminants. The integrated sensor
is built to withstand the rigors of a harsh production
setting. Key internal electronics are fully protected
and reliably perform in even the most challenging
wet or dry environments.
Per HACCP principles,
metal detectors are
considered a critical control point and continuous
checking is required to meet standards. MPI metal
detectors can be programmed to automatically remind
the operator to test equipment performance at pre-set
intervals. Metal contaminant detections, changes
in parameter settings, etc., are logged with both
date and time. The log can be viewed on screen or
downloaded via a serial port. To fulfill HACCP and IFS
standards, data can be downloaded to a Windows-
based PC.
HACCP and IFS
Compliance
Ø d
typical material
flow cu.ft./hr.
typical material
flow l/hr.
approximate
sensitivity Ø mm
FE AI SS
4” 700 20000 0.5 0.7 0.8
5” 1000 28000 0.7 0.9 1.0
6” 1500 43000 0.8 1.1 1.3
8” 2600 74000 1.2 1.6 1.8
10” 4000 115000 1.5 2.0 2.3
12” 5800 165000 1.9 2.4 3.0
14” 7900 225000 2.2 2.7 3.3
16” 10300 290000 2.4 2.9 3.6
20” 16200 460000 2.8 3.5 4.2
24” 23200 656000 4.6 5.8 6.9
Specifications
distributed by:
The installation and use of metal detectors help to protect your product and reputation from harm
caused by metallic foreign body contamination. Committed to the highest standards of excellence,
MPI’s goal, together with Cassel, is to ensure the quality of our customers’ products by providing the
most reliable, sensitive and easy-to-use metal detectors in the world.
Because Cassel metal detectors are so user-friendly, manufacturers
enjoy the benefits of the metal detector immediately after installation.
The simple-to-use, straight-forward operating system quickly guides
users through the steps needed to set-up and operate the metal
detector. The integrated Metal Shark® 1 or optional Metal Shark® 2
controllers are designed for intuitive operation, making Cassel metal
detectors among the simplest and easiest to operate. Technical
personnel are not required to operate the metal detector.
For more information on the equipment featured in this brochure
or any other MPI product or service, please contact your local
sales representative or MPI customer service at
800.544.5930 or [email protected].
About Magnetic Products,
Inc. (MPI)
Magnetic Products Inc.
(MPI), based in southeastern
Michigan, is a worldwide
provider of both magnetic
and non-magnetic material
handling solutions. MPI leads
the industry by continually
engineering inventive magnetic
equipment and advancing
customer education, through
significant investments in
research and development
and proactive product training.
For 30 years, MPI has
implemented a business model
that combines technologically
superior equipment with
industry-leading customer
service. MPI interacts closely
with its customers and
expands its offerings to meet
the changes of a dynamic
marketplace. Visit www.
mpimagnet.com.
MPI is
a proud
partner
of Material Process Equipment
(MPE), turn-key solution
provider that specializes in
metal control systems, custom
fabrication and electronic
controls.