Magnetic Products SR Series - Manual

Magnetic Products, Inc.
683 Town Center Drive,
Highland, MI 48357
Tel: 248-887-5600
Email: [email protected] • Website: www.mpimagnet.com
Magnet Head Pulley - Separation Roll Magnets (SR Series)
List Price QUOTE
Magnet Head Pulley - Separation Roll Magnets (SR Series)
Application:
MPI's Magnetic Head Pulley/Separation Roll Magnets remove both large and small ferrous tramp iron contaminants from product
streams in belt conveyor systems. SR series separators provide continuous, 24/7 automatic removal of tramp iron from material
flow.
Operation:
SR series separators are used typically as head pulleys in belt conveyors. As tramp metal nears the separator's magnetic field, it is
attracted and held to the conveyor belt until it reaches the conveyor underside, where it passes out of the magnetic field and
discharges into a chute or bin (by others). The cleaned, contaminant-free material discharges from the top of the conveyor, away
from the tramp iron.
Standard Features:
• Powerful Ceramic 8 permanent magnet material
• Stainless steel face
• Rugged all-welded construction
• (3) different magnetic circuits to choose from
• Face widths from 8" through 62"
• Roll diameters from 4" through 36"
Optional Features:
• High-energy Rare Earth magnetic material
• (4) Crowned face styles to choose from
• (2) Hub styles to choose from
• Carbon or stainless steel shaft to customer specifications
• Non-standard widths and/or diameters
· MAGNET CIRCUITS · MAGNET FACE OPTIONS · HUB OPTIONS · SR SERIES PART NUMBER CODE
MAGNET CIRCUITS
• Axial [A]:
This magnet circuit provides alternating north and south magnetic poles around the roll diameter providing optimum magnetic field "reach-out" and a consistent
magnetic pole across the roll width. This magnet design is ideal for capturing medium-to-large types of tramp metal in moderate to deep product flows on the conveyor
belt.
• Salient [S]:
This magnet circuit provides a large number of highly concentrated magnetic poles at intervals across the roll width and a consistent magnetic pole around the roll
diameter. This magnet design is ideal for capturing small-to-fine types of tramp metal in shallow product flows on the conveyer belt.
• Radial [R]:
This magnet circuit provides a lower number of highly concentrated magnetic poles at intervals across the roll width as compared to a salient design, improving
magnetic field "reach-out" and a consistent magnetic pole around the roll diameter. This magnet design is ideal for capturing small-to-large types of tramp metal in
shallow to moderate flows on the conveyor belt.
MAGNET FACE OPTIONS
4/21/2014 | Page 1 of 2