Epson 220 User Manual
Epson lq-2080, User replaceable parts, Options

EPSON LQ-2080
2/99
EPSON LQ-2080
- 1
User Replaceable Parts
Options
Paper Handling Options
High-capacity cut-sheet feeder (C80673✽)
Feeds up to 150 sheets of paper, 25 plain bond envelopes, or
30 postcards into the printer without reloading. You can also
load a stack of single-sheet multipart forms up to 0.59 inch
(15 mm) thick in this feeder.
Second-bin cut-sheet feeder (C80674✽)
Connects to the high-capacity cut-sheet feeder to create a
double-bin cut-sheet feeder. You can load up to 50 sheets of
ordinary single-sheet paper in the second-bin cut-sheet feeder.
Pull tractor (C80032✽)
Improves continuous paper handling and reduces the chance
of paper jams. Using a pull tractor in combination with a
push tractor is especially useful for printing on continuous
preprinted forms, multipart forms, and labels, and also for
printing high-quality graphics.
Roll paper holder (#8310)
Allows you to use your printer with 8.5-inch roll paper like
that used with telex machines.
Note:
The asterisk (✽) is a substitute for the last digit of the product
number, which varies by country.
knob
control panel
paper guide
paper
separator
paper release
lever
edge guides
front paper guide
(closed)
paper guide
cover
printer cover
bottom cover
tractor
paper thickness
lever
shield plate
ribbon cartridge
parallel interface
paper tension
unit
front edge guides
front paper guide
(open)
User Replaceable Part
Parts Price List Name
Part Number
Bottom cover
Bottom cover
1039404
Connector cover
Upper connector cover
1037223
Connector cover screws (2)
C.B. S-tite screw
1002674
Front edge guides
Front edge guides
1039456
Front paper guide
Front cover
1039403
Knob
Knob
1039405
Logo plate
Logo plate
1045389
Paper guide cover
Printer cover assembly
1044972
Paper tension unit
Paper eject assembly
1046629
Paper thickness lever cap
Lever cap
1039412
Printer cover
Printer cover assembly
1046632
Rear edge guides
Rear edge guides
1039499
Rear push tractor
Rear tractor assembly
1039012
Ribbon cartridge
Ribbon cartridge
S015086
Document Outline
- User Replaceable Parts
- Options
- Printer Specifications
- Mechanical
- Electrical
- Environmental
- Paper
- Ordinary single sheets: front, top, and cut-sheet feeder entry
- Single-sheet multipart forms: front, top, and cut-sheet feeder entry
- Envelopes: top entry only
- Postcards: front and top entry
- Continuous paper (standard and multipart): front, rear, and bottom entry
- Continuous paper with labels: front and bottom entry
- Roll paper: rear entry with optional roll paper holder only
- Paper Alignment
- Printable Area
- Safety Approvals
- CE Marking
- Control Panel Buttons and Lights
- Error Indicators
- Status Monitor
- Paper Positions
- Available Paper Paths
- Paper Release Lever Positions
- Paper Thickness Lever Positions
- Paper Handling
- Loading Multipart Forms
- Loading Continuous Paper with Labels
- Using the Front Push Tractor (optional)
- Using the Rear Push Tractor
- Using the Tractor in the Pull Position
- Switching Between Printing on Continuous Paper and Printing on Single Sheets
- Adjusting the Top-of-Form Position
- Advancing the Paper to the Tear-Off Edge
- Installing the Ribbon Cartridge
- Clearing Paper Jams
- Your Printer’s Default Settings
- Aligning Vertical Lines in Your Printout
- Printing a Self Test
- Printing a Hex Dump
- Cleaning the Printer
- Transporting the Printer
- Related Documentation