Magnetic Products RSDM Series User Manual
Round spout drawer magnets (rsdm series)
Magnetic Products, Inc.
683 Town Center Drive,
Highland, MI 48357
Tel: 248-887-5600
Email: [email protected] • Website:
Round Spout Drawer Magnets (RSDM Series)
Application:
MPI's Round Spout Drawer Magnets (RSDM series) are designed to remove medium and small size ferrous tramp metal contaminants from dry, granular, free-flowing
product streams in round gravity-fed vertical chutes and spouts. The RSDM series offers an easy and economical solution for protecting processing equipment and
providing greater product purity. It is an ideal product for sifter and screener discharge spouts, eliminating the need for mounting transitions or flanges.
Operation:
The product stream flows through one or two tiers (depending on model selection) of 1" diameter magnetic tubes designed to create an extremely effective magnetic
circuit. The two-row units have magnetic tubes staggered to prevent bridging or choking of the product stream and to maximize magnetic filtration as product flows
through the housing. Tramp metal contaminants move to the underside of the magnetic tubes eliminating tramp metal "wash off." The front door panel with magnetic
tubes attached can be quickly unlatched, removed and cleaned outside the product flow area.
Standard Features:
• Stainless steel construction
• Powerful Rare Earth magnet material
• One or two rows of seam-welded 1" dia. magnet tubes
• Integral support mount
• Available with four (4) different flange options
Options:
• Ceramic 8 magnet material
• Non-standard housing flange connections
• Non-standard alloy stainless steel construction
• Non-standard magnetic tube spacing
Caution: Product bridging and eventual choking can occur if flow characteristics are not considered.
Results 1 - 25 of 56
Item #
Type
Product Flow Area
No. of Tubes
Dimension A
Flange Options
List Price
RSDM-04-REN-FC
1 Tier
8.3 in²
53 cm²
1
4 in
Flex Coupling
QUOTE
RSDM-04-REN-RE
1 Tier
8.3 in²
53 cm²
1
4 in
Round Flange
QUOTE
RSDM-04-REN-TR
1 Tier
8.3 in²
53 cm²
1
4 in
Tension Ring
QUOTE
RSDM-04-REN-CC
1 Tier
8.3 in²
53 cm²
1
4 in
Compression
QUOTE
RSDM-05-REN-FC
1 Tier
11.2 in²
72.2 cm²
2
5 in
Flex Coupling
QUOTE
RSDM-05-REN-RE
1 Tier
11.2 in²
72.2 cm²
2
5 in
Round Flange
QUOTE
RSDM-05-REN-TR
1 Tier
11.2 in²
72.2 cm²
2
5 in
Tension Ring
QUOTE
RSDM-05-REN-CC
1 Tier
11.2 in²
72.2 cm²
2
5 in
Compression
QUOTE
4/20/2014 | Page 1 of 2