Magnetic Products MT Series Magnetic Tubes - Manual

Application: MPI's MAGNETIC TUBES (MT Series)
are commonly used to remove small to medium size
ferrous tramp metal contaminant from a variety of
product streams. Typical uses include removing
metallic grit from hydraulic reservoirs to minimize wear
on the machine's seals and bushings. Another typical
use is for removing unwanted ferrous contaminant’s in
food and chemical processing systems, thus improving
product quality standards.
Operation: The product stream flows around one or
more 1" diameter magnetic tubes located within the
product stream that are attached to their housing via
the tapped end holes. As tramp metal contanimants are
captured, they move to the underside of the tubes,
eliminating tramp metal “wash-off”.
MT Series magnetic tubes are easy to install and clean.
They offer an efficient and economical ferrous metal
filtration protection of your processing equipment.
The tubes may be used as individual units or part of
multiple row arrangements, such as 2 row, 3 row, or 4
row. And when using a multiple row arrangement the
tube rows should be on 2" centers with the rows
staggered for maximum magnetic separation.
Magnetic Tubes
Series: MT
1" DIAMETER
¼"-20
X
3/8" DEEP
TAPPED HOLE
(EACH END)
304 STAINLESS STEEL TUBE
Model Shown
MT-110
MPI Homepage Our Services Contact Us