Magnetic Products MC-SC Series - Manual

Magnetic Products, Inc.
683 Town Center Drive,
Highland, MI 48357
Tel: 248-887-5600
Email: [email protected] • Website: www.mpimagnet.com
Magnetic Chutes Self Clean (MC-SC Series)
MPI's Magnetic Chute includes the use of (2) or (4) Plate Magnets located on opposite sides of a vertical chute depending on the model selected. As product is
conveyed by gravity vertically, the tramp metal contaminants are captured by the opposing Plate Magnets. These models offer a very effective yet low profile elevation
magnetic solution and are available in either (2) or (3) cell configurations with manual or automatic self cleaning design options.
Application:
MPI's exclusive "Self-Cleaning" Magnetic Chutes (MC-SC Series) are designed to remove medium-to large-size ferrous tramp metal contaminants from high-volume
product flows in gravity-fed vertical chutes, such as grain, chemicals, foods and powders. MC-SC Series magnets are ideal for use with heavy product flows which
would otherwise bridge or choke if filtered through magnetic grates. Magnetic Chutes help protect milling, processing and packaging equipment, as well as improve
product quality.
Operation:
The product stream flows between two large, powerful permanent magnets located on either side of the chute. A center diverter directs the product flow toward the two
magnetic faces, which are "stepped" to minimize tramp metal "wash-off." Tramp metal contaminants are pulled form the product stream and attach themselves to the
magnetic face. The pneumatically operated cleaning shell safely removes the tramp metal from the product stream to a disposal area outside the chute.
Standard Features:
• Powerful Ceramic magnet material
• Safety guards, air filters and NEMA 9 enclosed solenoids as standard equipment
• Closed cell gasket for a positive seal
• Center diverter and stepped magnetic faces to maximize tramp iron removal
Optional features:
• High energy Rare Earth magnet material
• 316L stainless steel construction
• Tramp metal collection trays
• NEMA 2 through 13 electrical enclosures
• Non-standard alloy stainless steel designs
• Chute transition adapters
Results 1 - 14 of 14
Item # Product's Flow Max.
Inlet Opening Area
Product's Inlet Flow
Opening Length "A"
Unit's Overall Length
"B"
Weight List Price
MC-1010-SC 80 in²
516 cm²
10 in
25.4 cm
40 in
101.6 cm
215 lb
97 kg
QUOTE
MC-1012-SC 96 in²
619 cm²
12 in
30.5 cm
44 in
111.7 cm
258 lb
117 kg
QUOTE
MC-1014-SC 112 in²
723 cm²
14 in
35.6 cm
48 in
121.9 cm
301 lb
136 kg
QUOTE
MC-1016-SC 128 in²
826 cm²
16 in
40.6 cm
52 in
132.0 cm
344 lb
156 kg
QUOTE
MC-1018-SC 144 in²
929 cm²
18 in
45.7 cm
56 in
142.2 cm
387 lb
175 kg
QUOTE
MC-1020-SC 160 in²
1032 cm²
20 in
50.8 cm
60 in
152.4 cm
430 lb
195 kg
QUOTE
4/21/2014 | Page 1 of 2