Installation instructions, Electrical connections – Electrolux EFC 630 User Manual
Page 10
10
INSTALLATION INSTRUCTIONS
It is dangerous to alter the specifications or attempt to modify this product in any way.
Technical Information
DIMENSIONS
HEIGHT CANOPY:
24cm
HEIGHT CHIMNEY - UPPER SECTION
40cm
LOWER SECTIN
36cm
WIDTH CANOPY
60cm
DEPTH:
49cm
ELECTRICAL SUPPLY:
Voltage (50Hz)
220-240 V
POWER CONSUMPTION:
225W
FAN MOTOR:
145W
LAMP:
2 x 40
80W
SUITABLE FOR INSTALLATION
ABOVE:
ELECTRIC HOB:
7KW (max)
GAS HOB:
10KW (max)
SLOT-IN GAS COOKER
13.5KW (max)
SLOT-IN ELECTRIC COOKER
12.4KW (max)
Note: CE Marking certifies that this appliance complies with the require-
ments laid down in EEC directive 89:336. (Electromagnetic compatibility)
and subsequent modifications and Low Voltage directive 72/23/E.
ELECTRICAL CONNECTIONS
This appliance must be earthed
Electrical Requirements
Any permanent electrical installation must
comply with the latest I.E.E. Regulations and
local Electricity Board regulations. For your own
safety this should be undertaken by a qualified
electrician e.g. your local Electricity Board, or a
contractor who is on the roll of the National
Inspection Council for Electrical Installation
Contracting (NICEIC).
Electrical Connection
Before connecting to the mains supply ensure
that the mains voltage corresponds to the
voltage on the rating plate inside the cooker
hood.
This appliance is fitted with a 3 core mains
cable and must be permanently connected to
the electricity supply via a double-pole switch
having 3mm minimum contact gap on each
pole. A Switched Fuse Connection Unit to
BS1363 Part 4, fitted with a 3 Amp fuse, is a
recommend
e
d mains supply connection
accessory to ensure compliance with the Safety
Requirements applicable to fixed wiring
instructions.
This appliance conforms to BS 800: 1988 and
EEC Directive No. 78 308 regarding
suppression of radio and television
interference.