Magnetic Products GM-1212 - Manual

Magnetic Products, Inc.
683 Town Center Drive,
Highland, MI 48357
Tel: 248-887-5600
Email: [email protected] • Website: www.mpimagnet.com
Item # GM-1212, Grate Magnets (GM Series)
List Price $175.00
Grate Magnets (GM Series)
Application:
MPI's Grate Magnets (GM Series) are designed to remove medium and small-size ferrous tramp metal contaminants from dry,
granular free-flowing product streams in gravity-fed vertical chutes, hoppers, housings, surge or catch bins. GM Series Grate
Magnets are easy to install and clean. They offer efficient, economical magnetic protection of processing equipment such as;
milling, extruding, and mixing, while at the same time improving product purity.
Operation:
The product stream flows through a row of 1" diameter magnetic tubes, located on 2" centers, allowing 1" of space between
each tube. The tubes are held in place with a stainless steel support frame. As tramp metal contaminants are captured, they
move to the underside of the magnetic tubes, eliminating tramp metal "wash-off". MPI Grate Magnets are designed for easy
removal and cleaning of collected tramp iron.
Standard Features:
• Powerful Ceramic 8 permanent magnetic material
• Liquid tight, seam-welded end caps
• 100% stainless steel enclosed design
• 1" dia. magnetic tubes, mounted on 2" centers
• Rugged all-welded construction
Optional Features:
• High-energy rare earth magnetic material
• Three different types of product stream diverters
• Magnetic tube spacing other than 1"
• Quick-clean designs
• All-magnetic grate designs
• Custom grate sizes and mountings to meet design criteria
Type D2 Diverters:
Designed for fine, free-flowing product streams. This diverter design has a 90-degree bend to ensure the maximum contact of
product onto the magnetic tube.
Type D3 Diverters:
Recommended for medium-size product streams. The 60-degree bend permits a smooth product flow while still forcing the
product over the magnetic tubes.
Type D4 Diverters:
Designed for coarse, granular product streams. These diverters are designed with 0.375" dia. stainless steel bars, providing
minimal product flow deflection.
SPECIFICATIONS
Shape
Square
Magnet Type
Ceramic
4/20/2014 | Page 1 of 2