Magnetic Products GM Series Grate Magnets - Manual

Application: MPI's GRATE MAGNETS (GM Series)
are designed to remove medium and small-size ferrous
tramp metal contaminant’s from dry, granular
free-flowing product streams in gravity-fed vertical
chutes, hoppers, housings, surge or catch bins. GM
Series GRATE MAGNETS are easy to install and clean.
They offer efficient, economical magnetic protection of
processing equipment such as; milling, extruding, and
mixing, while at the same time improving product purity.
Operation: The product stream flows through a row of
1" diameter magnetic tubes, located on 2" centers,
allowing 1" of space between each tube. The tubes are
held in place with a stainless steel support frame. As
tramp metal contaminant’s are captured, they move to
the underside of the magnetic tubes, eliminating tramp
metal “wash-off”. MPI GRATE MAGNETS are designed
for easy removal and cleaning of collected tramp iron.
Grate Magnets
Series: GM
Model Shown
GM-1010, Square Grate
Magnet, 10" wide x 12" long.
Model Shown
Custom designs available to fit your application.
Model Shown
GM-14R, Round Grate Magnet, 14” Dia.
OPTIONAL
DIVERTERS
MPI Homepage Our Services Contact Us