Magnetic Products FFC-QC Series - Manual

Magnetic Products, Inc.
683 Town Center Drive,
Highland, MI 48357
Tel: 248-887-5600
Email: [email protected] • Website: www.mpimagnet.com
Free Flow Cylinder Magnets Quick Clean (FFC-QC Series)
MPI's Free Flow Cylinder Magnet is an MPI exclusive designed magnetic separator that utilizes a six sided permanent magnet located in the center of a stainless steel
housing for use in vertical gravity-fed product flows. As the product passes over and around the magnet, tramp iron is captured and collected. Oncoming product flow, if
able, washes tramp metal around to the bottom side of the magnet to eliminate tramp iron "wash-off". These models are ideally suited for applications that require high
magnetic performance in difficult flowing, abrasive or high volume process stream flows.
Application:
MPI's exclusive Quick-Cleaning Free-Flowing Cylinder Magnets (FFC-QC Series) are designed to capture both large and small tramp metal from high-volume,
abrasive, vertical gravity-fed product streams such as grain and mining products. The FFC-QC Series magnets provide maximum ferrous tramp metal retention in
product streams where "wash-off" is of concern.
Operation:
A powerful six-sided permanent magnet is located in the center of the stainless steel housing. As the product stream flows around the magnet through the housing,
ferrous metals collect on the magnet's surface. The six sided magnet combines the advantages of both the plate and grate magnet designs into one. Like a grate
magnet, ferrous metals are directed to impact on the magnet to insure their capture. Metal which is subject to product stream "wash-off" is held to the magnet surface
and simply rotates around the magnet until it out of the product flow area. Also like a plate magnet, each of the six magnet surfaces has a high "reach-out" magnetic
field that is required to attract and retain large ferrous metals. The exclusive quick clean stripper shell allows for easy removal of metal from the product stream to a
disposable area outside the chute.
Standard Features:
• Powerful Permanent Ceramic magnet material
• Removable stripper shell-provides three wear surfaces to handle abrasive products
• 100% Stainless Steel construction
• Heavy-duty hexagon shaped magnet
Optional Features:
• Non-standard alloy stainless steel construction
• Tramp metal collection tray
• Automatic Self-Cleaning designs
• Product flow inlet and outlet transitions
• Matching companion flanges supplies for quick and easy installation to existing chutes
Results 1 - 6 of 6
Item # Max. Inlet Area Opening Depth Dimension "A" Weight List Price
FFC-18-QC 216 in²
1394 cm²
18 in
46 cm
632 lb
287 kg
QUOTE
FFC-24-QC 288 in²
1858 cm²
24 in
61 cm
817 lb
371 kg
QUOTE
FFC-30-QC 360 in²
2323 cm²
30 in
76 cm
1002 lb
455 kg
QUOTE
FFC-36-QC 432 in²
2787 cm²
36 in
91 cm
1187 lb
540 kg
QUOTE
FFC-42-QC 504 in²
3252 cm²
42 in
107 cm
1372 lb
624 kg
QUOTE
4/21/2014 | Page 1 of 2