Magnetic Products FFC-30-SC User Manual
Specifications
Magnetic Products, Inc.
683 Town Center Drive,
Highland, MI 48357
Tel: 248-887-5600
Email: [email protected] • Website:
Item # FFC-30-SC, Free Flow Cylinder Magnets Self Clean (FFC-SC Series)
List Price QUOTE
MPI's Free Flow Cylinder Magnet is an MPI exclusive designed magnetic separator that utilizes a six sided permanent magnet located in the center of a stainless steel
housing for use in vertical gravity-fed product flows. As the product passes over and around the magnet, tramp iron is captured and collected. Oncoming product flow, if
able, washes tramp metal around to the bottom side of the magnet to eliminate tramp iron "wash-off". These models are ideally suited for applications that require high
magnetic performance in difficult flowing, abrasive or high volume process stream flows.
Application:
MPI's exclusive Self-Cleaning Free-Flow Cylinder Magnets (FFC-SC Series) are designed to capture both large and small tramp metal from high volume, vertical
gravity-fed product streams. They are especially suited for abrasive grain or mining products. FFC-SC Series Magnets provide maximum ferrous tramp metal retention
in product streams where "wash-off" is a concern.
Operation:
A powerful six-sided permanent magnet is located in the center of the stainless steel housing. As the product stream flows around the housing, ferrous metals collect
on the magnet's surface. The six-sided magnet combines the design advantages of both the plate and grate magnets into one design. Like a grate magnet, ferrous
metals are directed to impact on the magnet surface to ensure their capture. Metal which is subject to product stream “wash-off ” is held to the magnet's surface and
simply rotates around the magnet until it is out of the product flow area. Like a plate magnet, each of the six magnetic surfaces has a high "reach-out" magnetic field
required to attract and retain large ferrous metal. The pneumatically operated stripper shell safely removes tramp metal from the product stream to a disposable area
outside of the chute.
Standard Features:
• 100% Stainless steel housing
• Heavy-duty hexagon shaped magnet
• Removable magnet stripper shell provides three wear surfaces to handle abrasive products
• Pneumatically operated cleaning system
• Safety guards, air filters and NEMA 1 construction standard
Optional features:
• Non-standard stainless steel construction
• Tramp metal collection tray
• Electrically operated cleaning system
• NEMA 4 through 13 enclosures available
• Product flow inlet and outlet transitions
• Matching companion flanges for easy installation into existing chutes
SPECIFICATIONS
4/21/2014 | Page 1 of 2