Magnetic Products DSH Series Drum Separators and Housing - Manual

Magnetic Products, Inc.
683 Town Center Drive,
Highland, MI 48357
Tel: 248-887-5600
Email: [email protected] • Website: www.mpimagnet.com
Drum Separators and Housing (DSH Series)
Application:
MPI's Magnetic Drum Separators & Housing (DSH series) are designed to provide trouble free automatic extraction of tramp iron from heavy flows of large size and
abrasive materials, such as coal, aggregates, ores, sugarcane and others.
Operation:
When the product stream enters the drum, the powerful permanent magnetic field reaches out and retains ferrous particles on the revolving shell. As the product
stream flows by the shell, any non-ferrous product falls unhindered from the shell, while tramp iron particles are solidly retained and carried away from the product
stream, out of the magnetic field, past a divider and deposited into a tramp metal collection container. These DSH-Series magnets are available in standard diameters
(from 12" to 36 ("305 to 915 mm)) and widths, providing efficient separation on volumes up to 25,600 cubic feet (725 cubic meters) per hour.
Standard Features:
• Permanent Ceramic 8 magnet material
• Motors are gear reduction drive, with inline torque limiter, 230/460 volt, 3 phase, 60 cycle
• Stainless steel construction
• Easy removal of drum from drive side access panel for service and maintenance (if required) without removing housing from line
Benefits:
• Rare Earth magnet material
• Explosion-proof motor
• De-magnetizers
Results 1 - 25 of 52
Item # Drum Diameter Speed Drum Width Capacity List Price
DSH-1212 12 in
305 mm
45 rpm 12 in
305 mm
1000 ft³/h
28 m³/h
QUOTE
DSH-1214 12 in
305 mm
45 rpm 14 in
356 mm
1200 ft³/h
34 m³/h
QUOTE
DSH-1216 12 in
305 mm
45 rpm 16 in
406 mm
1400 ft³/h
40 m³/h
QUOTE
DSH-1218 12 in
305 mm
45 rpm 18 in
457 mm
1600 ft³/h
45 m³/h
QUOTE
DSH-1220 12 in
305 mm
45 rpm 20 in
508 mm
1800 ft³/h
50 m³/h
QUOTE
DSH-1224 12 in
305 mm
45 rpm 24 in
610 mm
2200 ft³/h
62 m³/h
QUOTE
DSH-1230 12 in
305 mm
45 rpm 30 in
762 mm
2800 ft³/h
80 m³/h
QUOTE
DSH-1236 12 in
305 mm
45 rpm 36 in
915 mm
3300 ft³/h
93 m³/h
QUOTE
DSH-1242 12 in
305 mm
45 rpm 42 in
1067 mm
3900 ft³/h
110 m³/h
QUOTE
4/20/2014 | Page 1 of 2