Magnetic Products DMA-SC Series - Manual

Magnetic Products, Inc.
683 Town Center Drive,
Highland, MI 48357
Tel: 248-887-5600
Email: [email protected] • Website: www.mpimagnet.com
Drawer Magnets with Self-Aligning Drawer Self Clean (DMA-SC Series)
Application:
MPI's Self-cleaning 200-Series Drawer Magnets (DMA-SC Series) remove fine and medium sized ferrous tramp metal contaminant from dry, granular free-flowing
product streams, in gravity-fed vertical chutes. The DMA-200 Series Drawer Magnet is ideal for protecting processing equipment such as milling, extruding and mixing
machinery from ferrous contaminant, while at the same time improving and maintaining product quality standards.
Operation:
Product flows through two rows of 1" diameter magnetic tubes, designed to create an extremely effective magnetic circuit. The rows of magnetic tubes are staggered to
maximize magnetic filtration as product flows through the housing. Tramp metal contaminant move to the underside of the magnetic tubes, eliminating tramp metal
"wash-off." After terminating the product flow, the magnetic tubes are mechanically pulled through the non-metallic stripper assemblies, cleaning the magnetic tubes
and depositing the metal contaminant outside the product stream into a collection tray.
Standard Features:
• Drawer tracking system reduces force required to move magnets through the strippers and eliminates jamming caused by mis-alignment
• Larger stripper surface "land" at point of contact on magnet tube, combined with larger stripper inside diameters, provide longer stripper life
• Mechanical latch system ensures magnet's stripper plate is sealed during product flow
• Hassle free self cleaning model
• Powerful Rare Earth Neodymium-Iron-Boron permanent magnet material
• Operating temperatures up to 250º F
• 100% stainless steel housing
• Two rows of 1" dia. magnetic tubes on 2" centers
Options:
• Ceramic 8 magnet material for less severe tramp iron applications
• Multi-tier configurations
• Non-standard alloy stainless steel construction
• Non-standard magnetic tube spacing
• Stainless steel track
• Pre-drilled matching companion flanges to simplify installation
• Rare Earth Samarium-Cobalt magnet material available for higher operating temperatures
Results 1 - 7 of 7
Item # Spouting Opening
Area
DMA's Opening
Area "B"
DMA's Flange
Width "C"
DMA's Overall
Width "D"
No. of Magnetic
Tubes (2 Rows) Weight List Price
DMA-208-SC 16 in²
103 cm²
64 in²
20 cm²
12.25 in
31 cm
21 in
53 cm
7 206 lb
94 kg
QUOTE
DMA-210-SC 36 in²
232 cm²
100 in²
25 cm² 14.25 in
36 cm
23 in
58 cm
9 231 lb
105 kg
QUOTE
DMA-212-SC 64 in²
413 cm²
144 in²
30 cm² 16.25 in
41 cm
25 in
63 cm
11 249 lb
113 kg
QUOTE
DMA-214-SC 81 in²
523 cm²
196 in²
35 cm² 18.25 in
46 cm
27 in
68 cm
13 273 lb
124 kg
QUOTE
DMA-216-SC 100 in²
645 cm²
256 in²
40 cm² 20.25 in
51 cm
29 in
74 cm
15 299 lb
136 kg
QUOTE
DMA-218-SC 144 in²
929 cm²
324 in²
45 cm² 22.25 in
56 cm
31 in
79 cm
17 315 lb
143 kg
QUOTE
4/20/2014 | Page 1 of 2