Emerson Radio ES299 - Manual (Page 40)

39
Special Functions
TIMER Operation (On Remote Control Only)
This system includes a programmable Timer function. You can use the timer to
wake you up to the TUNER, or to your favorite CD.
The timer can be programmed while the unit is in the Standby (Power Off) mode,
the TUNER, CD, CARD-USB, or AUX mode.
To Set The TIMER The 1 ST Time
1.) Press and hold the TIMER button on the remote control.
The “ on” indicators appear and the Hour digits
will begin flashing in the display.
2.) Press the SKIP/TUNING + or – buttons to set the display to the desired turn
‘On’ hour, AM or PM.
3.) Press the TIMER button. The Minute digits begin
flashing.
4.) Press the SKIP/TUNING + or – buttons to set the
display to the desired turn ‘On’ minute.
5.) Press TIMER button again.
The “ OFF” appears in the display, the Hour
digits begins flashing.
Press the SKIP/TUNING + or – buttons to set the display to the desired turn
‘Off’ hour, AM or PM.
6.) Press the TIMER button. The Minute digits begin
flashing.
ES299_062905.p65 29/6/2005, 15:07 39