Emerson Radio ES299 User Manual

Page 38

Playing MP3 Audio Files Stored On SD/MMC Memory Cards

Note: The card reader in this system can only read files in MP3 format. It

cannot read files in other compressed audio formats such as WMA, AAC, etc.

1.) Turn the system 'On' as usual.

2.) Press the FUNCTION button repeatedly until the main

display shows "CARD – USB".

3.) Insert your “SD” or “MMC” flash memory card

containing MP3 audio files into the SD/MMC

card slot as shown in the illustration.

Note: The card can only be inserted one

way. Push it in as far as it will go until it

locks in place.

4.) The player will read the information on the

card and the display will show the total number of files

“Tracks” and “Albums” on the card.

The reader LED indicator will light up.

5.) Press the

PLAY/PAUSE button to begin playback.

• Adjust the VOLUME, EQ, and DBBS controls as desired.

• You can skip tracks with the SKIP TUNING "+" or "–" buttons just as you would

with a normal CD.

• You can skip Albums with the ALBUM/MEM.CH "+" or "–" buttons.

• You may press the MODE button once to enter “Album

Search” mode, then press the SKIP TUNING "+" or

"–" buttons to search the desired album.

Note: If the album name is not recognized, or if the

album was not properly named, the display will show

“UNKNOWN”.

6.) Playback will continue until the last track has played and then the display will

again show the total number of tracks, albums on the card.

Note: If you have finished listening and want to remove your memory card

before the music ends, always press the STOP button first and then remove

your card. If you remove the card before pressing the STOP button you may

cause an electro-static discharge (ESD) condition and this may prevent the

card reader from operating properly until the ESD condition is cleared.

ES299_062905.p65

29/6/2005, 15:07