Emerson Radio ES299 - Manual (Page 26)

25
7.) Adjust the VOLUME, DBBS and EQ controls as desired.
8.) Playback will continue until all tracks on the disc have been played, then the
player stops and the display shows the total tracks number and playing time on
the disc.
To stop playback at any time, press the STOP button.
9.) If you are finished listening, press the OPEN/CLOSE button to open the CD
tray, remove your disc from the player, re-close the tray and press the
STANDBY/ON button to return the system to the Standby (Off) mode.
Pause Control
To pause temporarily during CD playback press the PLAY/PAUSE button again.
The sound stops and the elapsed time flashes in
the display, but the disc continues spinning.
Press the PLAY/PAUSE button once more to cancel Pause mode and resume
playback at the same point, the elapsed time stops flashing.
Skip Track and High Speed Music Search
• During playback, repeatedly press the SKIP/TUNING + or – buttons to skip to
higher or lower numbered tracks. Playback will begin on the selected track.
• During playback, depress and hold the SKIP/TUNING + or – buttons to search
within a track at high speed to locate a specific musical passage.
Release the SKIP/TUNING + or – buttons when you hear the desired passage.
Normal speed playback will resume at that point.
ES299_062905.p65 29/6/2005, 15:07 25