Electrolux 61300 - Manual (Page 39)

Installation and Connection Instructions
39
Removing Transit Packaging
Important! Ensure all transit packaging is removed prior to installation.
Retain transit packaging for future use.
3
The appliance is supplied with a spanner (H) and plastic caps (E) (2 pcs.)
and (G) (1 pc).
0
1. Remove the hose holder (A).
2. Remove the 2 screws (B) with the spanner supplied (H).
3. Remove the 4 screws (C).
4. Remove the transit bar (D).
5. Cover the holes left by screws (B) the 2 plastic caps (E).
Important: When fitting the plastic caps, press until they snap into the
rear panel securely.
6. Replace the 4 screws (C), for safe keeping.
7. Remove the screw and compression spring (F) with the spanner (H),
cover the hole with plastic cap (G).
Important: When fitting the plastic cap, press until they snap into the
rear panel securely.