Electrolux 61300 - Manual (Page 22)

Operating Instructions
22
Set the Final Spin Speed or Select RINSE HOLD
0
If necessary change the spin speed for the final spin
or select RINSE HOLD: turn the selector knob to the
position required.
If RINSE HOLD is selected, the washing stays in the
final rinse water, it is not spun.
3
If you do not change the spin speed, the final spin
will be automatically adjusted to suit the washing program:
The speed for the intermediate spin is dependent on the program
selected and cannot be changed.
During the Washing Program
Programm progress indicator
The program selector serves as a progress indicator by moving clockwise
until the end of the program is reached.
3
For the programs STAIN, MAIN WASH and QUICK WASH immediately
after the program has started the program selector moves to a position
directly behind QUICK WASH. Then it displays the program progress as
usual.
Alter settings
You can at any time
– alter the setting of the final spin speed,
– select RINSE HOLD,
– alter the temperature setting.
Other settings cannot be altered.
To interrupt the washing program prematurely:
0
1. Press the ON/OFF button.
2. Turn the program selector clockwise to PUMP OUT.
3. Press the ON/OFF button again.
Water is pumped out.
– COTTONS/LINEN 1100 revolutions per minute
– EASY-CARES 1000 revolutions per minute
– DELICATES 1000 revolutions per minute
– WOOLLENS 1000 revolutions per minute