beautypg.com

Emerson CF2455ORB00 User Manual

Page 10

background image

5. Obtain the die cast glass holders and light kit glass

from the protective bags.

6. Position the light kit glass carefully on a convenient

surface with the open side face down.

7. Remove the protective cover from the adhesive

backed material on the glass holders (Figure 18).

8. Firmly press the die cast glass holders into

position on the light kit glass (Figure 19).

9.

Repeat these procedures for the second die cast
holder.

10. Carefully turn the light kit glass assembly over.

Thread two knurled knob screws (supplied)
several turns onto the die cast glass holders
(Figure 20). Leave approximately 3/16” of the
stud threads revealed.

10

LIGHT KIT ADAPTER

LIGHT KIT GLASS

KNURLED KNOB
SCREW

ROTATE LIGHT KIT GLASS
COUNTERCLOCKWISE

VIEWED FROM TOP

Figure 21

12. Your ceiling fan is now installed and wired and

ready for use.

DIE CAST
GLASS HOLDER

PROTECTIVE COVER ON
ADHESIVE BACKED MATERIAL

Figure 18

DIE CAST
GLASS HOLDER

LIGHT KIT
GLASS

Figure 19

TURN KNURLED KNOB
SCREW SEVERAL TURNS
INTO THE GLASS HOLDER

LIGHT KIT
GLASS

DIE-CAST GLASS
HOLDER

Figure 20

11. Raise the light kit glass assembly and insert the

two knurled knobs through the two keyholes in
the light kit adapter. Turn the light kit glass
assembly counterclockwise to engage the
knurled knob screws in the slots (Figure 21).
Carefully reach between the fan blade flanges
and the light kit glass and securely tighten the
two knurled knob screws.

This manual is related to the following products: