Purdy AND-TFT-35VX-KIT - Manual (Page 2)

AND-TFT-35VX-KIT
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
2 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 3/22/08
Power Consumption
Recommended Operating Conditions (VSS1 = VSS2 = GND = 0V, Ta = 25°C)
Item Symbol Conditions
Specifications
Units
Typ. Max.
Supply Current for Gate Driver (Hi level) I
GG
V
GG
=+17V 0.12 0.15 mA
Supply Current for Gate Drive (Low level) I
EE
V
EE
=-10V 0.15 0.19 mA
Supply Current for Source Driver (Digital) I
DD1
V
DD1=
+3.3V 4.8 8.0 mA
Supplly Current for Source Driver (Analog) I
DD2
V
DD2
=+10V 16.0 30.0 mA
Supply Current for Gate Driver (Digital) I
CC
V
CC
=+3.3V 0.17 0.21 mA
LCD Panel Power Consumption – – 180 332 mW
Backlight Power Consumption P
LED
– 384 456 mW
Total Power Consumption – – 564 788 mW
Item Symbol
Specifications
Unit
Min. Typ. Max.
Supply Voltage for Source Driver
V
DD1
3.0 3.3 3.6 V
V
DD2
9.5 10 10.5 V
Supply Voltage for Gate Driver
V
GG
– +17 – V
V
EE
– -10 – V
V
CC
3.0 3.3 3.6 V
Digital Input Voltage
V
IH
0.8 V
DD1
– V
DD1
V
V
IL
0 – 0.2 V
DD1
V
Recommended Driving Conditions for LED Backlight (GND= 0V, Ta=25ºC)
Item Symbol Min. Typ. Max. Unit Remarks
Supply Voltage of LED Backlight V
LED
9 9.6 11.4 V I
L
= 20MA
Supply Current of LED Backlight
I
LED1
– 20 – mA Note 1
I
LED2
Backlight Power Consumption P
LED
360 384 456 mW Note 2
Note 1: LED B/L applied information, please refer to the appendix at the end.
Note 2: P
LED
= V
LED
* I
LED1
+ V
LED
* I
LED2
.