Purdy AND12C285-DHB-KIT - Manual

Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
11/8/06 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 1
AND12C285-DHB-KIT
12.1 ” SVGA Color TFT LCD Module
Features
• 12.1” SVGA color display with Super High Luminance
• High Brightness 500cd/m
2 with 4-CCFL sidelight
• Built-in Long Life Lamps (MTTF:50,000 h)
(Condition/ T a:25°C ,/
FL
:6mA(rms)(continuous lighting),
f
FL
:40kHz)
• Mounting hole compatible with AND12C289
• Replaceable structure of lamp units
• Applications: Display Terminals, Scientific Instruments,
Medical Instruments, Test and Measurement
Instruments, Process Control/Factory Automation
Equipment, Office Automation Equipment
*1: 8 color bars pattern
*2: Except the efficiency of FL inverter
Mechanical Specifications
Item Specification Unit
Outline
Dimensions
278.3 (W) x 216.0 (H) x 113.5 max (D) mm
Number of
Pixels
800 (W) x 600 (H) pixels
Active Area 246 (W) x 184.5 (H) mm
Pixel Pitch 0.3075 (W) x 0.3075 (H) mm
Weight
(approx.)
900 gram
Backlight 4-CCFL, Sidelight type –
Absolute Maximum Ratings
Item Symbol Min Max Unit
Supply Voltage
V
DD
-0.3 4.0 V
V
FL
0 2.0 kV(rms)
FL Driving Frequency f
FL
0 100 kHz
Input Signal Voltage V
IN
-0.3 V
DD
+ 0.3 V
Operating Ambient Temperature
(web bulb temp should be 39°C Max.,
and no condensation of water.) T
op
0 50 °C
Operating Temperature for Panel
(surface temp caused by self heat radia-
tion of cell itself is specified here) T
op
0 60 °C
Storage Temperature T
stg
-20 60 °C
Humidity
(Max. wet bulb temp = 39°C)
– 10 90 %RH
Electrical Specifications (Ta = 25°C)
Item Symbol Min Typ Max Unit
Supply Voltage
(I
FL
=6mA)
V
DD
3.0 3.3 3.6 V
V
FL
580 630 680 V(rms)
FL Start Voltage
(Ta = 0°C)
1400 – 1900 V(rms)
High Level Input Voltage V
IH
0.8V
DD – V
DD –
Low Level Input Voltage V
IL 0 – 0.2V
DD V
Current Consumption
I
DD
(*1) – (280) (450) mA
I
FL
(*2) 3.0 – 6.0 mA(rms)
Power Consumption (*1, *2)
I
FL
= 6.0mA(rms)
P – (16) – W
Optical Specifications (Ta = 25°C)
Item Symbol Min Typ Max Unit
Contrast CR 100 250 – –
Response
t
on
– – 50 ms
t
off – – 50 ms
Luminance L (400) (500) – cd/m 2
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.