Thermo Pride Air Handler MA - Manual (Page 32)

SECTION X: MAINTENANCE
Filters must be cleaned or replaced when they become dirty. Inspect at
least once per month. The frequency of cleaning depends upon the
hours of operation and the local atmospheric conditions. Clean filters
keep unit efficiency high.
LUBRICATION
The bearings of the blower motor are permanently lubricated.
SECTION XI: WIRING DIAGRAM
FIGURE 11: Wiring Diagram
Thermo Products, LLC
5235 West State Road 10
North Judson, IN 46366
www.thermopride.com
Copyright © 2012 by Johnson Controls, Inc. All rights reserved.