Subaru Robin SGX3500 User Manual
Page 27
- 25 -
Do not loosen.
7-2-4 ALTERNATOR
(1) Remove the AVR unit, brush holder.
(2) Set the generator set with the rear cover
upwards.
NOTE) Before starting this work, make sure
engine oil has been discharged.
(3) Remove the two flange nuts (SGX3500: bolt)
fixing rear cover onto the mount rubbers.
M8 flange nut (bolts) . . . 2 pcs.
(4) Remove the stator
NOTE) The rear cover and the stator are clamped together by two of M6 bolts and nuts.
Do not loosen these bolts prior to being removed of the rear cover united with the stator.
(4)-1 Remove the rear cover united with the stater.
Flange bolt M6 . . . . . 4pcs.
(4)-2 Loosen the bolt and nut. (united the rear cover with the stator).
Bolt M6 . . . . . 2pcs.
(4)-3 Remove the rear cover
(4)-4 Remove the stator cover with claws (2pcs)
Raised up by using screw driver.
NOTE) The stator is heavy. Be careful do not hit the coil of the stator to the rotor.