Subaru Robin SGX3500 - Manual (Page 21)

- 19 -
6-3 STATOR
Disengage connectors on the wires from stator
and check the resistance between wires with a
circuit tester referring to the following table.
NOTE : If the circuit tester is not sufficiently
accurate, it may not show the values
given and may give erroneous
readings. Erroneous readings will also
occur when there is a wide variation of
resistance among coil windings or when
measurement is performed at ambient
temperatures different from 20 °C (68 °F)
.
6-4 ROTOR ASSEMBLY
1) Field coil
Remove the brush holder and measure
resistance between the slip rings.
NOTE : If the circuit tester is not sufficiently accurate, it may not show the values given and may
give erroneous readings.
Erroneous reading will also occur when there is a wide variation of resistance among coil
windings or when measurement is performed at ambient temperatures different from from
20°C (68°F).
*Ambient temperature at 20℃（６８°F ）
0.21 AC WINDING 1 Green-Black 0.27 0.26
0.32
HOUR MATER COIL Red-White 48.5 55.6 58.9
SUB COIL Blue-Blue 2.1 2.06
0.18
AC WINDING 2 BLACK②-WHITE 0.487 0.26 0.18
AC WINDING 1 BLACK①-WHITE 0.481 0.26
FREQUENCY 60Hz
RATED VOLTAGE 120V/240V
(Ω）
SGX3500 SGX5000 SGX7500
B
W W
①
②
*Ambient temperature at 20℃（６８°F ）
SGX7500 58.9
(Ω）
ROTOR (SLIP RING)
SGX3500
SGX5000
60Hz-120/240V
48.5
55.6