Subaru Robin RGX3600 - Manual (Page 39)

– 36 –
5-3-5 Rear Cover
(1) Install rear cover over stator, lightly hitting at the center
portion of rear cover with plastic hammer.
Tool : Plastic hammer
(2) Tighten stator bolts (RGX4800) or cover bolts
(RGX2900/3600).
Fastener : M6 - 150 mm Stator bolts (4 pcs - RGX4800)
M6 - 130 mm Cover bolts (3 pcs - RGX3600)
M6 - 110 mm Cover bolts (3 pcs - RGX2900)
Tool : Box wrench (12 mm)
RGX2900/3600
5-3-6 Bushing
Insert wirings into bushing, and push bush (big grove side)
into rear cover hole.
Tightening torque : 4.5-5.9 N m
(50-60 kgf cm)
(3.6-4.3 ft lbs)
RGX4800
Tightening torque : 11.8-13.7 N m
(120-140 kgf cm)
(8.7-10.1 ft lbs)