Subaru Robin RGX3600 - Manual (Page 37)

– 34 –
5-3-1 Front Cover
Install front cover onto main bearing cover of the engine in
position.
Fastener :
M8 - 20 mm (4 pcs) Bolt with spring washer & washer
5-3-2 Rotor
Install rotor onto crankshaft.
Fastener :
M8x1.25 - 240 mm Through bolt with washer (RGX2900)
M8x1.25 - 260 mm Through bolt with washer (RGX3600)
M10x1.5 - 240 mm Through bolt with washer (RGX4800)
RGX2900/3600
NOTE: Before installing, clean and wipe off oil and foreign
materials from taper portion of crankshaft.
RGX4800
5-3 REASSEMBLY PROCEDURES
Tightening torque : 11.3-13.2 N m
(115-135 kgf cm)
(8.3-9.7
ft lbs)
Tightening torque : 22.5-24.5 N m
(230-250 kgf cm)
(16.6-18.1ft lbs)
Tightening torque : 11.8-13.7 N m
(120-140 kgf cm)
(8.7-10.1 ft lbs)