Electrolux B 89092-4 - Manual (Page 15)

15
To programme the Oven to
switch on and off
1. Carry out the "Cooking Duration" setting
as described at points 1 to 4 in the previous
chapter.
2. Touch the "Time Function" control
twice: the symbol flashes near the "End of
Cooking Time" symbol
(Fig. 14).
3. Within 5 seconds, touch control “ “ to
select the required end of cooking time,
which is shown at the right hand of the time
display (Fig. 15).
4. After another 5 seconds after you have set
the time, the symbol stops flashing, the
thermometer symbol comes off, the tem-
perature display shows "30" and the oven
switches off. This means that the setting has
been stored in the Electronic Control memory
and that the countdown started.
5. The oven will switch on and off
automatically according to your settings.
When cooking is completed, you hear an
acoustic alarm while both symbols and
flash. The time display shows "0.00" at
the left hand.
6. To switch off the acoustic alarm, touch any
control.
To cancel the programme, simply cancel the
Cooking Duration time as described at the
end of the previous chapter.
Fig. 14
Fig. 15