Electrolux B 89092-4 - Manual (Page 14)

14
To programme the Oven to
switch off
1. Switch the oven on, place food in the oven,
select a cooking function and adjust the
cooking temperature, if required.
2. Touch the "Time Function" control . The
symbol flashes near the "Cooking
Duration" symbol . The time display
shows "0.00" at the left hand and the current
time of day at the right hand (Fig. 12).
3. Symbol will flash for 5 seconds. Within
this time, touch control to select the
required time. Maximum time is 23 hours 59
minutes. Note that the time indication on
the right hand will also change as you touch
control , showing at which time the
oven will automatically switch off (Fig. 13).
4. After another 5 seconds after you have set
the time, the symbol stops flashing. This
means that the setting has been stored in
the Electronic Control memory and that the
countdown started.
5. When cooking time is over, the oven
automatically switches off. You hear an
acoustic alarm while symbol flashes and
the time display shows "0.00".
6. To switch off the acoustic alarm, touch any
control.
To cancel the Cooking Duration Time:
Touch time function control : the symbol
flashes near the "Cooking Duration" symbol
. Then touch control until the time
display shows "0.00".
Please note that, if you cancel the "Cooking
Duration", the oven does not switch off.
Fig. 12
Fig. 13