Elo TouchSystems ENTUITIVE TOUCHMONITOR ET1545C - Manual (Page 36)

Appendix C : Technical Specifications
30 - Elo Entuitive Touchmonitor CRT Rear Mount User Guide
Touchmonitor Specifications
Picture Tube 17” (15.7” diagonal viewable
image), 0.27-mm dot pitch,
anti-static, anti-glare, and TCO
treatment coated. 15” (13.8” diagonal viewable
image), 0.28-mm dot pitch,
anti-static, anti-glare, and
multiple layer coating.
Maximum
Resolution 1280 x 1024 @ 60Hz 1280 x 1024 @ 60Hz
Deflection Frequency Horizontal: 30-70 kHz
Vertical: 50-150 Hz
Horizontal: 30-70 kHz
Vertical: 50-150 Hz
Maximum Video
Input Bandwidth 108 MHz 108 MHz
Display Area* Factory Setting:
approx. 305 mm x 229 mm
Factory Setting:
approx. 260 mm x 195 mm
Input Signal R.G.B. Analog, 15 pin D-sub R.G.B. Analog, 15 pin D-sub
Input Voltage 100-240 VAC 1.5A 100-240 VAC 1.3A
Display Colors* Analog input; unlimited colors Analog input; unlimited colors
Power Consumption 80 watts 75 watts
Power Management Compliant with EPA/Energy
Star, NUTEK/TCO VESA
DPMS signaling method. Compliant with EPA/Energy
Star, VESA DPMS signaling
method.
Plug and Play
Compatibility Compliant with VESA DDC 1/
2B standards. Compliant with VESA DDC 1/
2B standards.
CRT Life Average operational CRT life is
12,000 hours to half brightness. Average operational CRT life is
12,000 hours to half brightness.
17” Monitor 15” Monitor
*Dependent on video controller/card used.