Elo TouchSystems ENTUITIVE TOUCHMONITOR ET1545C - Manual (Page 17)

Installing the Driver Software
Elo Entuitive Touchmonitor CRT Rear Mount User Guide - 11
Installing the Driver Software
Elo TouchSystems provides driver software that allows your touchmoni-
tor to work with your computer. Drivers are located on the enclosed CD-
ROM for the following operating systems:
❑ Windows 2000
❑ Windows 98
❑ Windows 95
❑ Windows NT 4.0
Additional drivers and driver information for other operating systems
(including MS DOS, Windows 3.x, OS/2, Macintosh and Linux) are
available on the Elo TouchSystems web site at www.elotouch.com.
Your Elo touchmonitor is plug-and-play compliant. Information on the
video capabilities of your touchmonitor is sent to your video display
adapter when Windows starts. If Windows detects your touchmonitor,
follow the instructions on the screen to install a generic plug-and-play
monitor.
Refer to the appropriate following section for driver installation instruc-
tions.
Installing the Serial Touch Driver for
Windows 2000, 95/98 and NT 4.0
Note: For Windows 2000 and NT 4.0 you must have administrator
access rights to install the driver.
1. Insert the Elo CD-ROM in your computer’s CD-ROM drive.
If the AutoStart feature for your CD-ROM drive is active, the system
automatically detects the CD and starts the setup program.
2. Follow the directions on the screen to complete the driver setup
for your version of Windows.
If the AutoStart feature is not active:
1. Click Start > Run.