Rosen Aviation 0602 Series : Single-Disc Blu-ray Player with SDI - Manual (Page 7)

Rosen Aviation Blu-ray DVD Player with SDI
Document Number: 105880 Revision: B
Date: 09/19/13
Template: 4.4.1.6FM2; Revision A; 12/06/12 Page 7 of 33
Figure 3 shows the Blu-ray DVD player for 7.1 analog audio output configurable to 5.1, 2.1 or
stereo.
Figure 3 Audio system example for 7.1 audio
3. INSTALLATION GUIDELINES
The Blu-ray DVD player can play discs in a horizontal or vertical orientation, which allows the unit
to mount in either orientation.
Outline and Installation drawings are available to assist in the installation process. Pay close
attention to the dimensions when considering installation requirements.
Mount the Blu-ray DVD player with a minimum of four #8-32 screws. The following figures show
the mounting option dimensions. Remove the #8-32 screws from either side, or use the threaded
holes in the bottom surface as mounting points.
 Side mount –left and right (six screws; three screws per side) minimum two opposing
outer holes per side is required
 Bottom-surface mount (minimum of four screws)
 Grounding port uses a #10- 32 3/8” screw (not provided)
 Maximum mounting screw depth is .312”
Blu-ray DVD Player
(main connector)
Volume-controlled audio:
seven speakers with one subwoofer
Fixed-level Audio:
left and right
Rosen Headphone
Distribution Amplifier
Headphones
Audio amplifier
7.1 Audio