Rose Electronics ViewLink CATx - Manual (Page 8)

2 VIEWLINK CATX INSTALLATION AND OPERATIONS MANUAL
Features
 Available in automatic skew and non-skew models that connect to
computers with PS/2 keyboard and mouse ports, computers with USB
keyboard and mouse ports, or KVM switches with DB25F KVM ports
 Extend a KVM station from a CPU using a single CATx cable
 Resolution :
Up to 1920 x 1440 @ 60Hz @ 300’
1024 x 768 @ 60Hz @ 1,000’
 ViewLink CATx uses a microprocessor to emulate the keyboard and mouse
for plug and play operation. The keyboard and mouse on the receiver Unit
do not have to be connected for the PC to boot; only the transmitter Unit
must be connected to the PC
 Compatible with Rose Electronics family of KVM switches such as
ServeView Pro, UltraView Pro and UltraMatrix
 Operating system independent
 Status indicator LEDs on each RJ45 connector
 All settings and video tuning are performed automatically. No user
adjustments are needed to achieve a crystal clear display on the receiver
KVM monitor. (Manual adjustments are available using special keyboard
commands)
Package contents
The package contents consist of the following:
 The ViewLink CATx transmitter and receiver units as ordered
 Power adapter for receiver Unit
 Installation and operations manual
 PS/2 “Y” cable for receiver unit
CATx and other cables are usually ordered separately. If the package contents
are not correct, contact Rose Electronics or your reseller, so the problem can
be quickly resolved.
Rose Electronics web site
Visit out web site at www.rose.com for additional information on the ViewLink
CATx and other products that are designed for data center applications,
classroom environments and other applications.
About this manual
This manual covers the installation and operation of the ViewLink CATx
models.