Rose Electronics MultiVideo - Manual (Page 41)

KEYBOARD COMMANDS
ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL
27
Keyboard commands
The following table describes the available keyboard commands. The
key sequence is a press and release of the left control key.
Commands following must be entered within 2 seconds.
Command Key sequence Description
OSD menu F12 Displays on-screen menus
CPU select ESC List of CPUs to select
Select
computer nnn where nnn
= computer number Connects the KVM station to
the selected computer.
Next computer + Selects next sequential CPU
Previous
computer - Selects previous sequential
CPU.
Scan ON S Turns scan mode on
Scan OFF X Turns scan mode off
Display label D Turns CPU label on/off
Logoff L Disconnects from currently
connected computer.
Set mode Mnn
where nn = mode
value from Table 5. Alternate way to configure
keyboard and mouse.
Set resolution Yn
where n = resolution
value from Table 6 Alternate way to set screen
resolution when no video is
present from a CPU..
Screen saver
time Vnnn
where n = 0 –999 sec. Alternate way to set screen
saver time.
Null mouse
command N Used to re-sync a PS/2
mouse.
Reset mouse O (alpha O) Resets computer’s mouse.
Reset
command R Resets and enables mouse
and keyboard on currently
selected computer
Max computers Pnnn Total ports used (all units)
Units Unn Number of expansion units.
Width Wnn Number of ports on
expansion units.
Keep K Saves to flash memory.
Table 6. Keyboard commands