Emerson Radio RET66BK - Manual (Page 11)

10
SETTING THE WAKE-UP TIME
1.) Depress and hold the ALARM 1 button. The display will change from clock
time to wake-up time and flash “12:00”.
Continue to hold the ALARM 1 button and repeatedly press the /HOUR
button to adjust the display to the correct wake-up hour, AM or PM.
2.) Continue to depress the ALARM 1 button and repeatedly press the /MIN
button to adjust the display to the correct wake-up minute.
3.) When the display shows the desired Alarm 1 wake-up time release all the
buttons.
Repeat this procedure with the ALARM 2 button to set the desired wake up time
for Alarm 2.
To check the wake-up times just press the ALARM 1 or ALARM 2 buttons at any
time. The display will show the wake-up times as long as the ALARM set buttons
are depressed.
RET66_080504.p65 5/8/2004, 16:05 10