RIGOL DS1000B - Manual (Page 30)

RIGOL
© 2008
RIGOL Technologies, Inc.
Quick Guide for DS1000B Series
4
E
N
G
L
IS
H
How to Connect Power Cord
After inspecting the instrument and the accessories, connect the
power cord as shown in the following figure.
Turn on the switch which is under the power socket, the instrument
then is powered on, and the power key on the front pannel is lit up
(twinkle like breathing)，press the key to start up the instrumemt.
If unable to power the instrument, take the following steps:
(1) Check the power cord connection;
(2) Check if the power switch on the rear pannel has been turn on;
(3) If the above inspections, the power key on the front pannel is
not lit, please take out the fuse and check, refer to the fuse
specification shown in the User’ Guide to change the fuse if
needed.
(4) After the above inspections, the power key on the front pannel
is still not lit, please contact RIGOL for help.