RIGOL MSO/DS2000A Series - Manual (Page 2)

(4). Load into the machine cabinet: mount the rack with the instrument fixed to it into a
standard 19-inch machine cabinet with four M6 screws and four M6 square nuts.
(5). Post-installation notice: the rack occupies a height of 5U. The holes pointed out by the
arrows are installation holes. Note that they should be aligned with during installation。
DS2000A Rackmount Kit
This oscilloscope can be mounted in a standard 19-inch rack cabinet that conforms to the
Electric Industrial Association (EIA) standard. If needed, please buy and install the
corresponding option.
1 Kit Parts List
No. Name Qty Description
1 Front Plate 1 --
2 Side Plate (right) 1 --
3 Presser feet 2 --
4 Side Plate (left) 1 --
5 Bottom Plate 1 --
6 M6 Screws 4 M6*16 Phil-Slot Pan Head Screw Nail
7 M4 Screws 14 M4*8 Phil-Slot Pan Head Screw Nail
8 M6 Nuts 4 M6*5 Square Machine Female Screw Contain Lock
Blade