Keys – RISCO Group ProSYS KP User Manual

Page 4

Keys

The keys on the keypad can be used for a variety of functions as explained below.

Control Keys

In Normal Operation mode: Used for Away (Full set) arming (setting)
In User Functions menu: Used to change data

In Normal Operation mode: Used for Stay arming (Partial setting)
In User Functions menu: Used to change data

Used to disarm (unset) the system after a user code is entered

Used to scroll up a list or to move the cursor to the left

Used to scroll down a list or to move the cursor to the right

Provides the system status (press for 2 seconds)

In Normal Operation mode: Used to enter the User Functions menu
In User Functions menu: Used to move back one step in the menu

Note:

The

key is equivalent to the

key on other ProSYS keypads.

Used to terminate commands and confirm data to be stored

Note:

The

key is equivalent to the

key on other ProSYS keypads.

Emergency Keys

Pressing both keys simultaneously for at least two seconds activates a Fire
alarm

Pressing both keys simultaneously for at least two seconds activates an
Emergency alarm

Pressing both keys simultaneously for at least two seconds activates a
Police (Panic) alarm

Function Keys

Used to arm (set) groups of zones (by default) or to activate a prerecorded
series of commands (macros)

Note:

For ProSYS UK version: Keys

and

are inactive.

Numerical Keys

Used to input numeric numbers when required

This manual is related to the following products: