RISCO Group Orbit Pro RP-296 - Manual (Page 6)

Summary of User’s Commands
This User's Manual contains all the
information needed to operate your
Rokonet ORBIT-PRO Security System
and to get the most from it. This page,
called a Command Summary, is
intended to give you brief summaries
of common system operations. More
detailed explanations and related
information can be found within, by
referring to the indicated page.
FUNCTION PROCEDURE MORE ON
System Arming
(Leaving Premises)
[USER CODE] [ARM]
Page 12
System Arming
(Remaining at Home)
[USER CODE] [STAY]
Page 12
System Disarming [USER CODE] [ENTER]
Page 15
Duress Disarming [DURESS CODE] [ENTER]
Page 16
Silencing an Alarm [USER CODE] [ENTER]
Page 15
Bypassing a Zone
[USER CODE ] [ BYP ] [ ZONE NUMBER TO BE
BYPASSED ] [ENTER]
Page 13, 20
Utility Output Operation
[ ] [ 2 ] [ 1 ] [USER CODE ] [ENTER] [ UTILITY
OUTPUT NUMBER ] [ENTER]
Page 20
Display Troubles
[ ] [ 3 ] [ 1 ] [USER CODE ] + [ENTER] AND
SCROLL
Page 23
Display Memory
[ ] [ 3 ] [ 5 ] [USER CODE ] [ENTER] AND
SCROLL
Page 21
Edit Time
[ ] [ 6 ] [ 1 ] [USER CODE ] [ENTER] [HH:MM]
[ENTER]
Page 22
Edit Date
[ ] [ 6 ] [ 2 ] [USER CODE ] [ENTER]
[MM:DD:YYYY] [ENTER]
Page 22
Chime On [ ] [ 4 ] [ 4 ] [USER CODE ] [ENTER]
Page 21
Chime Off [ ] [ 4 ] [ 3 ] [USER CODE ] [ENTER]
Page 21
Setting/Changing
a User Code
[ ] [ 5 ] [MASTER CODE] [ENTER] [CODE
NUMBER TO BE SET/CHANGED] [NEW CODE]
[ENTER]
Page 10
It is necessary to ARM your
system to obtain protection
from intrusion.
All other forms of
protection, including fire and
24-hour panic alarms (i.e.
police, fire, and auxiliary) are
always ready to report
alarms and do NOT need to
be armed.