RISCO Group Orbit Pro RP-296 - Manual (Page 18)

user manual 10
SETTING/CHANGING ACCESS CODES
STEP DESCRIPTION
1
The system must be disarmed).
Enter the User Functions Mode (
4
) and select Codes (5):
2 Enter the 4-digit (or 6) Master (or higher authority) Code, and
press [
ENTER]
3 Enter the two digit User Index number 00 to 98
Note: the index number 00 belongs to the Grand Master
Example:
For User Code 6, press
For User Code 12, press
4
Carefully enter the new code and press [ENTER]
If successful, you will hear a single confirming beep.
If not, you'll hear three quick error beeps;
5
Repeat steps 3 and 4 for additional codes until
complete.
6
When all codes are entered press key twice quickly
to reset and exit user function mode.