RISCO Group Orbit Pro RP-296 - Manual (Page 14)

user manual 6
FIRE LED
CONDITION EXPLANATION
ON A fire alarm or fire emergency is
in progress or has recently
occurred
OFF All fire zones are operating
normally
When lit, the FIRE LED
indicates that the
system is experiencing
a fire alarm. When
flashing, a problem has
been detected on the
fire circuit, and must be
serviced.
FLASHING A problem has been detected on
the fire circuit and must be
serviced.
BYPASS LED
CONDITION EXPLANATION
ON At least one intrusion zone is
bypassed, or when STAY mode is
selected The BYPASS LED is
normally lit when STAY
mode is selected
OFF All zones are operating normally
and the system is in ARM mode.
TAMPER LED
CONDITION EXPLANATION
ON A zone, keypad, or an external
module used by the system has
been physically disturbed or
tampered with. If disarmed without
fixing the problem, will silent the
sound only. The TAMPER LED
indicates that a zone, a
keypad or an external
module has been
tampered with, and
requires resetting. In
some cases a technician
code is required to
restore.
OFF All zones are operating normally
ZONE LED ( LED keypad only )
EXPLANATION
CONDITION
SYSTEM DISARMED SYSTEM ARMED
OFF The corresponding zone is secured
FLASHING The indicated
zone is
not secured
N/A
The ZONE LEDs
indicate the status of
each of the system’s
intrusion zones.
FOR LCD KEYPAD the
display indicates the
zone's number and
label.
ON N/A An alarm has
occurred on the
indicated zone