Eclipse - Fujitsu Ten AVN2227P - Manual (Page 8)

- 8 -
Deutsc
h
English
E
spañol
Français
Italiano
Nederlands
Svenska
• • Never cut the insulation on the power cable or use it to power any other main unit. If the rated current capacity of
the power cable is exceeded, fire and electric shocks may result.
• • The cables should be secured with tape or a similar securing method to prevent any obstructions while driving. If
they get wound or entangled around components such as the steering wheel, shifting lever, or brake pedal,
accidents may result.
• • If removing the end of the cable to connect to another cable, be sure to wrap PVC tape or a similar cable insulating
method around the connection to insulate it. If the connection is not insulated, fire or accidents may result.
• • Install and connect all of the peripheral units before connecting them to the main unit.
•
• Do not remove any of the protective caps (RCA, etc.) unless in use.
•
• Be sure to wrap the connection cables with tape (PVC tape) to insulate them.
Tip
1
TO EARTH
TO VEHICLE SPEED PULSE SIGNAL
TERMINAL (Refer to page 7)
Purple/
White
ANTENNA PLUG
1P
16P
CONNECT TO AN iPod ®
CONNECTION CABLE iPC-107p
(sold separately)
8P
8
Black
System connection e System connection e xample xample
3
2
TO VEHICLE-SIDE
CONNECTOR
13P
TO STEERING
REMOTE
CONTROL
Blue
Blue/White
TO TURN-ON LEAD OF EACH UNIT (Supply)
TO POWER ANTENNA RELAY (Supply)
TO SUB-WOOFER
TO EXTERNAL AMPLIFIER
Pink
TEL MUTE
AUX105
(sold separately)
TO THE RCA OUTPUT
CONNECTORS OF
EXTERNAL EQUIPMENT
(MP3 PLAYER,
MD PLAYER, etc.)
R SIDE (Red)
L SIDE (White)