Eclipse - Fujitsu Ten AVN2227P - Manual (Page 5)

Deutsc
h
Español
Français
Italiano
Nederlands
Svenska
English
- 5 -
• • Never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of
the power cable is exceeded, fire and electric shocks may result.
• • The cables should be secured with tape or a similar securing method to prevent any obstructions while driving. If
they get wound or entangled around components such as the steering wheel, shifting lever, or brake pedal,
accidents may result.
• • If removing the end of the cable to connect to another cable, be sure to wrap PVC tape or a similar cable insulating
method around the connection to insulate it. If the connection is not insulated, fire or accidents may result.
• • Refer to page 6 for details on the cable colours and connection points for interconnecting cables and .
• • Refer to page 6 for details on connection points to for the main unit terminals.
3 2
Tip
1
2
3
4
8
1P
5
B
E
ANTENNA PLUG
1
3
2
A
D
C
F
16P
8P
Tip*1
• • The positions of the B+ and ACC pins on the connector may
vary depending on the vehicle. In such cases, replace the end
of the connector. Ask your dealer for details on connector pin
positions.
Tip*1
TO VEHICLE-SIDE
CONNECTOR
Names and functions of ter Names and functions of ter minals minals
13P
F A
6